Automatic Technology Australia Elite Provozní pokyny Strana 5

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 20
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 4
INSTALLATION OF MECHANICAL DRIVE UNIT
The ATA ELITE SWING GATE OPENER is designed to operate most domestic swing gates. The gates
must be in good working condition and should operate by hand relatively freely. Wind loading may affect the
operation of the opener in high wind areas, correct obstruction and reversing settings should be chosen for
trouble free operations.
INITIAL CHECKING
STEP 1
Before commencing installation of the Elite Swing Gate
Opener, check the following:
1.The gate will move freely by hand for it’s full opening and
closing travel.
2.The pier or post for mounting must be of solid construction
(Brick, solid timber or steel). It must anchor most of the
force applied by the drive unit.
3.A weatherproof 240V 10A general purpose Power Point
should be available on or near the pier/post.
4.If dual gate operators are required, provision for underground
cabling should be made from one post to the other.
5.Side Room Clearance. Using table 1 and referring to Fig. 2
check that there is enough room available to mount the Drive
Unit. If there is not, the Minimum Side Room Kit (Page 8) will
need to be purchased by your distributor from ATA.
6.The mount distance of the Drive Unit should be recorded. This
value will be used later.
The mount Distance of the Drive Unit and the
Hinge Distance of the gates can be selected to opti-
mise the side room clearance.
NOTE: If the gates are already installed then
measure the Hinge Distance and use this to optimise
the Mount Distance.
470 470 470 470 470 470 465 460
450 470 480 470 465 460 435 425
470 465 470 465 460 440 420 390
470 465 445 430 400 350 390 250
0 50 100 125 150 180 200 220
90
120
140
200
SIDE ROOM CLEARANCE
MOUNT
DISTANCE
(MM)
HINGE DISTANCE
TABLE 1
FIG. 2
Page. 5
Zobrazit stránku 4
1 2 3 4 5 6 7 8 9 10 ... 19 20

Komentáře k této Příručce

Žádné komentáře