Automatic Technology Australia Elite Provozní pokyny stáhnout pdf (Strana 8)

MOTOR

GEARBOX ASSY

TOP CAM

LOWER CAM

MICROSWITCH

INSTALLATION OF ELECTRONIC CONTROL BOX

MOUNTING CONTROL BOX

STEP 4

The Control Box is to be mounted nearby the Drive Unit

using (4) 6mm screws. The mounting coordinates is 55mm x

275mm. When locating the Control Box allow ample space

around the unit for easy access and wiring connections.

Remove cover from control box.

Determine which leaf you would like to open first and close

last. This gate leaf must be connected to Motor 1 (M1) termi-

nals on the control board. Connect the Control Board with

Drive Unit(s) using 5 core cable. For detail of electrical in-

stallation see pages 10 & 11.

Note: The installation hand is determined from inside the gate

looking out to the street.

CAUTION: DO NOT USE ANY CABLE WHICH

CARRIES GREEN/YELLOW WIRES AS THIS SIGN-

IFIES EARTH, AND DOES NOT COMPLY WITH

ELECTRICAL AUTHORITY REGULATIONS.

LIMITS AND CAMS SET-UP

STEP 5

Setting of limits for open and closed position is performed

with opener in manual position (Fig 3 & 4).

DO NOT SWITCH ON POWER OR ENGAGE

MOTOR DRIVE YET.

For Right Hand Side installation:

When gate is closed turn lower cam in a clockwise direction

(Fig 10) until an audible click can be heard from the lower

micro-switch. Open the gate to the required opening position

and turn top cam in an anticlockwise direction until a click

can be heard from top micro switch.

For Left Hand Side installation:

When gate is closed turn top cam in a clockwise direction

(Fig 10) until an audible click can be heard from the top

microswitch. Open the gate to the required opening position

and turn lower cam in an anticlockwise direction until a click

can be heard from lower microswitch.

Page 8

ANTENNA

Mount the antenna at or above the height of the gate

or fence for optimal reception, which ever is higher.

(Fig 9). Do not cut antenna or coaxial cable.

FIG. 10

FIG. 9

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Komentáře k této Příručce

Žádné komentáře

Automatic Technology Australia Elite Provozní pokyny Strana 8

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání Automatic Technology Australia Elite